Clavister Eagle E7, Быстрый старт

Страница: 75 / 76

A screenshot of how the resulting VLAN list might look in the Web Interface is shown below.
2. Associate the VLANs with GESW interfaces
Go to Network > Interfaces and VPN > VLAN > Switch Management, enable port based VLAN
and set each GESW interface value to be associated with the relevant VLAN to get the desired
configuration. For this example, the screenshot below shows how this looks.
This last dialog is only available in the Web Interface for the E7.
Port Based VLAN Issues
There some issues which the adminstrator should be aware of when setting up port based
VLAN's:
• Port Based VLANs Cannot be Mixed with VLAN Trunks
When the port based VLAN feature is used all of the GESW interfaces act as access ports and
none can be used for 802.1q VLAN trunks.
• MAC Addresses are Duplicated
The MAC addresses of all the GESW interfaces are the same. This means that a switch might
have two connections to the security gateway that have two different IP addresses but the
same MAC address. For some switches this can be a problem and the situation should be
avoided.
Appendix C: Port Based VLAN Setup
75