Clavister Eagle E7, Быстрый старт, Страница: 13 / 76

ratings of all devices installed on the same circuit as the appliance and compare the total
with the rating limit for the circuit. The maximum ratings for the E7 are listed in
Appendix A,
Specifications .
• Surge Protection
A third party surge protection device should be considered and is strongly recommended as
a means to prevent electrical surges reaching the appliance. This is mentioned again in
Section 2.5, “Connecting Power” .
• Temperature
Do not install the appliance in an environment where the operating ambient temperature
could exceed the specified operating range (see
Appendix A, Specifications ).
The recommended operating temperature range is "room temperature". That is to say, the
temperature most commonly found in a modern office and in which humans feel
comfortable. This is usually considered to be between 20 and 25 degrees Celsius (68 to 77
degrees Fahrenheit). Special rooms for computer equipment may use a lower range.
• Airflow
Make sure that airflow around the appliance is not restricted.
• Dust
Do not expose the appliance to environments with elevated dust levels.
Note: The specifications appendix provide details
Detailed information concerning power supply range, operating temperature range and
other operating details can be found at the end of this publication in
Appendix A,
Specifications .
Flat Surface Installation
The E7 can be mounted on any appropriate stable, flat, level surface that can safely support the
weight of the appliance and its attached cables.
Rubber feet on the E7 unit are attached to the underside of the appliance for operation on a flat
surface. This protects both the surface and the appliance from external damage as well as
allowing air to circulate underneath the hardware during operation.
Caution: Always leave space around the appliance
Always ensure there is adequate space around the appliance for ventilation and access
to operating switches and cable connectors. No objects should be placed on top of the
casing.
The E7 can also be rack mounted using an optional kit which is described next in Section 2.2,
“Rack Mounting” .
Chapter 2: Installation
13