Clavister Eagle E7, Быстрый старт

Страница: 24 / 76

Chapter 3: cOS Core Configuration
• Management Workstation Connection, page 24
• Web Interface and Wizard Setup, page 27
• Manual Web Interface Setup, page 35
• CLI Setup, page 51
• Installing a License, page 59
• Setup Troubleshooting , page 61
• Going Further with cOS Core, page 63
3.1. Management Workstation Connection
cOS Core Starts After Power Up
It is assumed that the E7 unit is now unpacked, positioned and powered is applied. If not, the
earlier chapters in this manual should be referred to before continuing.
Clavister's cOS Core network security operating system is preloaded on the E7 and will
automatically boot up after power is applied. An external management computer workstation
can now be used to configure cOS Core.
The Default Management Interface
After first time startup, cOS Core automatically makes management access available on a single
predefined Ethernet interface and assigns the private IPv4 address
192.168.1.1 to it.
For the E7, the default management interface is any of the GESW interfaces since they are
connected together by a switch fabric. By convention, the first interface (labeled 1) is normally
used for management workstation connection.
cOS Core Setup Methods
Initial cOS Core software configuration can be done in one of the following two ways:
24