Clarke Contractor CON15, Инструкция по эксплуатации и обслуживанию

Страница: 8 / 20

8
LOADING THE COIL NAILER
WARNING: ENSURE THE COMPRESSED AIR SUPPLY IS DISCONNECTED
BEFORE ATTEMPTING TO LOAD THE COIL NAILER. DO NOT HOLD THE
TRIGGER WHILE LOADING THE NAILER.
The machine is loaded with nails as follows:
1. Press the latch (1) open
and pull the magazine
cover (2) back.
2. Knowing the nail size to be
used, raise and twist the
adjuster 90 degrees for the
chosen nail size as
required.
3. Insert a strip of nails into
the magazine, (pointed
end downwards), taking
care that the strip is wound evenly around the centre spigot (3) of the
height adjuster (4). Note that 3 different nail sizes can be used, as indi-
cated by the markings on
the inside of the maga-
zine. The sizes available
are listed on page 12.
4. Take care when handling
the nails, that they do not
become bound together.
1 2
3 4