Clarke Contractor CON15, Инструкция по эксплуатации и обслуживанию

Страница: 6 / 20

6
6. ALWAYS disconnect the tool from the air supply when not in use, and
before carrying out any maintenance or re-loading with fresh nails.
7. ALWAYS Store the tool out of reach of children.
8. NEVER allow persons unfamiliar with these instructions to operate this tool.
SERVICING
1. ALWAYS have power tools serviced by your Clarke dealer, using only
identical replacement parts. This will ensure the safety of the power tool is
maintained.
COIL NAILER SAFETY INSTRUCTIONS
1. Although the Coil Nailer is water resistant and may be used outdoors, DO
NOT leave it exposed to the elements. Avoid direct sunlight, direct heat,
rain/moisture etc.
2. ALWAYS keep the air hose away from the nailer and ensure that the
operator is not restricted by the length of the hose.
3. ALWAYS take care when a long air hose is required in the work area as it
presents a trip hazard. Coil the hose away as soon as the job is finished.
4. NEVER abuse hoses or connectors. NEVER carry a tool by the hose, or yank
it to disconnect from the air supply. Keep hoses away from heat, oil and
sharp edges. Check hoses for leaks or worn condition before use, and
ensure that all connections are secure.
5. NEVER use with an air supply greater than 8.2 bar (120 PSI).
6. NEVER use any other type of gas such as bottled oxygen or other bottled
gas as a power source to operate this tool. Use compressed air ONLY.
7. NEVER load the tool with the trigger depressed in case of accidental firing.
8. NEVER fire tool at an incline. It must be perpendicular to the work surface.
9. NEVER drive in nails at the edge of a work surface, as the edge could fail
and fly off, endangering yourself or others in the vicinity.
10. ALWAYS take care not to fire a nail into an existing metal fastening in case
the nail should ricochet causing personal injury.
11. NEVER operate the tool unless the safety nose is in contact with the
workpiece, or without any nails or damage to the tool could result.
12. ALWAYS keep hands away from the nose of the tool when connecting to
the compressed air supply.
13. ALWAYS ensure only the correct nails are used, as specified for this tool.