Clarke 7330367, Инструкция по эксплуатации и техническому обслуживанию

Страница: 14 / 28

14
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
ADJUSTING THE PRESSURE
There are 4 ways to adjust the pressure.
1. Adjust the pressure regulator on
the pump. Turn the pressure
regulator knob counter clockwise
to lower pressure. Once you have
finished using your power washer,
return the pressure regulator to its
original position.
2. Back away from the surface to be
cleaned. The further away you
are, the less the pressure will be on
the surface being cleaned.
3. Reduce the speed of the engine (RPM). Slow the engine down and the
water pressure will also go down.
4. Adjust the spray to a wider angle.
• Slide the nozzle forward for low pressure and backwards for high
pressure.
APPLYING DETERGENTS AND CLEANING SOLVENTS
1. Push the detergent hose onto the
ridged fitting as shown.
2. Place the other end of the
detergent hose with the filter on it,
into a container holding the
chemical/cleaning solution.
3. Slide the nozzle forward for low
pressure operation.
4. The following products are
available from your CLARKE dealer.
TRAFFIC FILM REMOVER
5 ltr Concentrate Part number 3050821
25 ltr Concentrate Part number 3050820
5 ltr Ready to use Part number 3050818
25 ltr Ready to use Part number 3050819
CAR WASH & WAX
5 ltr Wash and wax Part number 3050815