7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
HIGH PRESSURE HOSE
CONNECT THE HOSE TO THE GUN
1. Slide the connector on the hose
backwards.
2. Push the gun into the connector.
3. Release the connector.
• Make sure the connection is
secure.
CONNECT THE HOSE TO THE POWER WASHER
1. Slide the connector on the power
washer towards the machine.
2. Push the hose into the connector.
3. Release the connector.
NOTE:
Make sure the connection is
secure.
CONNECT THE WATER INLET HOSE
1. Remove the travel cap if fitted.
2. Fit the hose adaptor as shown.
3. Connect the water supply hose to
the hose adaptor.
NOTE:
The water source must
provide a minimum of 5
gallons per minute @ 20 psi.
NOTE:
Make sure the water inlet
hose is screwed on tightly.
Содержание 7330367
Страница 28: ......
