12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5. Set the fuel valve lever to the ‘ON’
position.
6. If you are starting the power
washer ‘cold’ set the choke lever
to the CHOKE position (left). If the
power washer is warm skip this
step.
7. Set the throttle to the 1/3rd of the
way towards the fast setting.
8. Pull the starting handle lightly until
you start to feel resistance and
then pull up sharply to start the
power washer.
NOTE:
You may have to do this
more than once.
.
9. Once the engine has warmed up,
set the choke lever to the ‘RUN’
(right) position.
If the engine does not start after two
pulls, pull the trigger on the gun to
relieve the pressure.
WARNING: ONCE THE POWER WASHER HAS STARTED, RELEASE THE
STARTING HANDLE SLOWLY TO AVOID INJURY/DAMAGE AS IT WHIPS
BACK.
Содержание 7330367
Страница 28: ......