background image

This vehicle security system requires interfacing with several of the vehicle's
factory wiring harnesses.  Be sure to verify all connections with a digital multi-meter
prior to making connections. Failure to do this can result in serious damage to the
vehicles electrical system or deploying an air bag(s). It is also highly recommended
that all connections are soldered, rather than the use of T-Taps or Scotch Locks. 

MS2105 / MS2107

VEHICLE SECURITY SYSTEM

w/ BUILT-IN REMOTE START 

UNGO-NET

INTERFACE

Installation Manual

Table of Contents:

1. 

Ungo-NET

Interface Introduction   . . . . . . . . . . . . . . . . . . . . . . . 2

2. Before You Begin  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. After the Installation is Complete   . . . . . . . . . . . . . . . . . . . . . . . 3
4. System Contents   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5. Installation Tips and Suggestions   . . . . . . . . . . . . . . . . . . . . . . . 4
6. Mounting Components   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7. Remote Transmitter Layout   . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
8. Wiring Information   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
9. Starter Disable Interface   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

10. Plug-in Connectors   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
11. Programming Remote Transmitters   . . . . . . . . . . . . . . . . . . . . . 9
12. Programmable System Parameters   . . . . . . . . . . . . . . . . . . . . 10
13. User Programmable Parameters   . . . . . . . . . . . . . . . . . . . . . . 10
14. Installer Programmable Parameters   . . . . . . . . . . . . . . . . . . . 12
15. System Test and Shock Sensor Adjustment  . . . . . . . . . . . . . . 15
16. Parking Light Jumper Settings  . . . . . . . . . . . . . . . . . . . . . . . . 16
17. Optional Circuit Interrupt   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
18. Dome Light Supervision Relay Diagram   . . . . . . . . . . . . . . . . 17
19. Trunk/Hatch Release Diagram   . . . . . . . . . . . . . . . . . . . . . . . 18
20. Horn Honk Wiring Diagram   . . . . . . . . . . . . . . . . . . . . . . . . . . 20
21. Negative Glow Plug Diagram   . . . . . . . . . . . . . . . . . . . . . . . . 20
22. Door Lock Diagrams   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
23. Driver’s Door Priority Wiring Diagram   . . . . . . . . . . . . . . . . . . 25
24. Status Indicator (LED) Function  . . . . . . . . . . . . . . . . . . . . . . . 28
25. Siren Chirp Status   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
26. Troubleshooting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
27. Warranty Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
28. Wiring Diagram   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

IMPORTANT NOTE: Do not install the MS2105/MS2107 into a manual transmission vehicle as it could result in
serious injury or death. 

MS2107 install.qxd  8/25/2003  12:50 PM  Page 1

Содержание UNGO MS2105

































Отзывы: