51
MAX973HD
English
Importing Data Using the SD Card
From the [
Import Data
] menu, you can import the downloaded data from the website. For more
information about the installation method and the function, see the Clarion homepage.
1. Touch the [
] (Next) key from the Setting menu.
2. Touch the [
Import Data
] key to display the Import Data menu.
Note:
When you perform the operation of data import, confirm that the SD card on which the relevant data is stored
has been set to the SD card slot.
To use the SD card
1. Press the [
7
OPEN/CLOSE
] button to open
the operation panel.
2. Confirming the orientation of the SD card,
insert the SD card surely to the SD card slot
until it stops.
Note:
For the detailed information on using SD cards, see
the
Audio Manual
.
CAUTION
CAUTION
Data may be broken when using SD cards in
the following situation:
When disconnecting the SD card or turning
the power off during writing or reading data.
When affected by static electricity or electric
noises.
It is recommended that you back up your
important data to a personal computer by
using the SD card.
Skin
You can import the Skin data stored in the SD
card into the hard disk drive.
Touch the [
Import
] key of the “
Skin
” item, then
operate according to the displayed messages.
To delete the data imported to the hard disk drive,
touch the [
Delete
] key.
Extra POI
You can import the Extra POI data stored in the
SD card into the hard disk drive.
Touch the [
Import
] key of the “
Extra POI
” item,
then operate according to the displayed
messages.
To delete the data imported to the hard disk drive,
touch the [
Delete
] key.
Safety Camera
You can import the location database of Safety
Cameras stored in the SD card to the hard disk
drive. Touch the [
Import
] key of “
Safety
Camera
”, then operate according to the
displayed messages. To delete the data imported
to the hard disk drive, touch the [
Delete
] key.
Note:
•
This function displays the locations of Safety
Cameras on the map using the imported location
database of the Safety Camera on the hard disk
drive, and warns that the vehicle approaches the
location. For details, see the Clarion’s homepage.
•
Be sure to import the location database of Safety
Cameras while the vehicle is stopped. The
message “
Reading Safety Camera data.
”
disappears when the import is finished. If the
vehicle starts to move before the message
disappears, the import will be cancelled.
Other data
You can also import the following data:
• Image data
• Album Infromation data
For the detailed information on importing these
data, see the
Audio Manual
.