Setting/Ejecting a Disc
16
MAX973HD
English
Owner
’s ma
nua
l
Storage
• Do not expose discs to direct sunlight or any
heat source.
• Do not expose discs to excess humidity or
dust.
• Do not expose discs to direct heat from
heaters.
Cleaning
• To remove finger marks and dust, use a soft
cloth and wipe in a straight line from the centre
of the disc to the circumference.
• Do not use any solvents, such as commercially
available cleaners, anti-static spray, or thinner
to clean discs.
• After using special disc cleaner, let the disc dry
off well before playing it.
On Discs
• Exercise a good precaution when loading a
disc. The operation panel will close
automatically when leaving it open for a while.
• Never turn off the power and remove the unit
from the car with a disc loaded.
CAUTION
For your safety, the driver should not insert
or eject a disc opening the operation panel
while driving.
Setting a disc
1. Press the [
7
OPEN/CLOSE
] button to open
the operation panel.
2. Insert a disc into the centre of the insertion
slot with the label side facing up.
The disc will automatically be drawn into the
DVD player, and the operation panel will
automatically be closed.
●
After setting a disc
The system will automatically be switched to the
relevant source mode according to the disc, and
start playing back the disc.
When a DVD video disc is set:
The system is switched to the DVD Video mode.
See “
DVD Video Operations
” (P. 25).
When an Audio CD is set:
The system is switched to the CD mode. See
“
Audio CD Operations
” (P. 37).
When a CD/DVD with MP3/WMA files is set:
The system is switched to the MP3/WMA mode.
See “
MP3/WMA Operations
” (P. 33).
Note:
•
Never insert foreign objects into the disc insertion
slot.
•
If the disc is not inserted easily, there may be
another disc in the mechanism or the unit may
require service.
•
8 cm (single play) discs cannot be used.
CAUTION
For your safety, the driver should not insert
or eject a disc opening the operation panel
while driving.
Ejecting the disc
1. Press the [
7
OPEN/CLOSE
] button to open
the operation panel.
2. Press the [
o
] (EJECT) button to eject the
disc.
“
EJECT
” appears in the display, and the
source mode then switches to the Tuner mode.
• If a disc is left in the ejected position for 15
seconds, the disc is automatically reloaded
(Auto reload). In this case, however, the
source mode will remain set to the Tuner
mode.
Note:
•
Do not eject the disc while recording the audio CD.
Eject the disc after the recording is completed or
after cancelling the recording.
•
If you force a disc into the insertion slot before auto
reloading, this can damage the disc.
No / Non