CKD M3GA/B R Series Скачать руководство пользователя страница 87 | Manualshive

Страница: 87 / 87

background image

SM-P00077-A/3

7. WARRANTY PROVISIONS

81

2020-04-15

7.

WARRANTY PROVISIONS

7.1

Warranty Conditions

◼

Warranty coverage

If the product specified herein fails for reasons attributable to CKD within the warranty period specified
below, CKD will promptly provide a replacement for the faulty product or a part thereof or repair the faulty
product at one of CKD’s facilities free of charge.
However, following failures are excluded from this warranty:
• Failure caused by handling or use of the product under conditions and in environments not conforming

to those stated in the catalog, the Specifications, or this Instruction Manual.

•  Failure caused by incorrect use such as careless handling or improper management.
•  Failure not caused by the product.
•  Failure caused by use not intended for the product.
•  Failure caused by modifications/alterations or repairs not carried out by CKD.
•  Failure that could have been avoided if the customer’s machinery or device, into which the product is

incorporated, had functions and structures generally provided in the industry.

• Failure caused by reasons unforeseen at the level of technology available at the time of delivery.
• Failure caused by acts of nature and disasters beyond control of CKD.

The warranty stated herein covers only the delivered product itself. Any loss or damage induced by
failure of the delivered product is excluded from this warranty.

◼

Confirmation of product compatibility

It is the responsibility of the customer to confirm compatibility of the product with any system, machinery,
or device used by the customer.

◼

Others

The terms and conditions of this warranty stipulate basic matters.
When the terms and conditions of the warranty described in individual specification drawings or the
Specifications are different from those of this warranty, the specification drawings or the Specifications
shall have a higher priority.

7.2

Warranty Period

The product is warranted for one (1) year from the date of delivery to the location specified by the
customer.

«
...
85
86
87

Содержание M3GA/B R Series
























































































Отзывы:

Нет отзывов

Похожие инструкции для M3GA/B R Series

Бренд: U-Prox Страницы: 31

Бренд: EasyIO Страницы: 12

Бренд: RMG Страницы: 6

Бренд: Canarm Страницы: 3

Бренд: Access Страницы: 12

Бренд: MacDon Страницы: 32

Бренд: K&K Страницы: 6

Бренд: IBM Страницы: 38

Бренд: Zamel Страницы: 2

Бренд: Zamel Страницы: 2

Бренд: Zamel Страницы: 2

Бренд: Vacon Страницы: 50

Бренд: V2 Страницы: 116

Бренд: V2 Страницы: 8

Бренд: V2 Страницы: 25

Бренд: V2 Страницы: 124

Бренд: Vacon Страницы: 6

Бренд: Vacon Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды