SM-P00077-A/3
2. INSTALLATION
29
2020-04-15
2.2
Unpacking
CAUTION
Do not remove the solenoid valves from their packaging bag until just before piping.
If bags are opened before the valves are ready to be piped, foreign matters may enter inside the
solenoid valves from the piping ports and may cause a failure or malfunction.
• Check that the model number ordered and the model number indicated on the product are the same.
• Check the exterior of the product for any damage.
• When any cautionary documents are provided with the product, read them, as well as this Instruction
Manual, before use.
• Secure sufficient space around the solenoid valve for installation, removal, wiring, and piping.
2.3
Mounting
CAUTION
Do not use a method of mounting that relies on support from the piping when mounting the
solenoid valve.
Mount and secure the solenoid valve body.
Tighten the screws with the appropriate tightening torque.
If assembly or tightening is not properly done, it may result in air leakage, product falling off,
damage to the threads, or deformation of DIN rails.
If using a DIN rail, make sure that it is strong enough.
• If the manifold weighs more than 1 kg, or if the installation environment is subject to vibrations or
shocks, secure the DIN rail onto the mounting surface at intervals of 50 mm to 100 mm.
• If the DIN rail is not strong enough, mount the manifold base directly.
