SECTION 4: USER INTERFACE
4-1
MENU SYSTEM
Several of the routines (marked with a * below) that are performed at the front panel are also
accessible from the control channel (See Section 5-4, Control Channel, for further operation).
The menu on the front panel of the AutoYoke allows you to do the following:
· Set DMX address
· Calibrate*
· Invert Pan, Tilt, Iris and Focus travel direction
· Select 8- or 16-bit operation
· Select DMX smoothing value
· Set Pan, Tilt, Iris and Focus Limits*
· Display software version
· Invert display
· Change LED display properties
· Restore Factory Defaults
· Display Error messages
Throughout this manual, the following conventions will be used to explain menu navigation:
·
Menu
:
The
Menu
button allows you to enter the menu item or return to the
upper level menu items.
·
Enter
:
The
Enter
button allows you to select a function.
·
st
:
The arrow keys allow you to navigate into and out of the
menu system.
·
Addr
Addr
:
Menu items that appears on the LED display on the front
panel will be presented in this format.
-16-