Cisco Sx350, Руководство CLI

Страница: 808 / 1323

Macro Commands
807 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
38
•
Apply a macro to an interface without displaying the actions being
performed
•
Apply a macro to the interface while displaying the actions being
performed
Syntax
macro {apply | trace} macro-name [ parameter-name1 value ] [ parameter-name2
value
] [
parameter-name3 value
]
Parameters
•
apply—Apply a macro to the specific interface.
•
trace—Apply and trace a macro to the specific interface.
•
macro-name —Name of the macro.
•
parameter-name value
—For each parameter defined in the macro, specify
its name and value. You can enter up to three parameter-value pairs.
Parameter keyword matching is case sensitive. All matching occurrences of
the parameter name in the macro are replaced with the corresponding
value.
Default Configuration
The command has no default setting.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
The macro apply command hides the commands of the macro from the user while
it is being run. The macro trace command displays the commands along with any
errors which are generated by them as they are executed. This is used to debug
the macro and find syntax or configuration errors.
When you run a macro, if a line in it fails because of a syntax or configuration error,
the macro continues to apply the remaining commands to the interface.
If you apply a macro that contains parameters in its commands, the command fails
if you do not provide the values for the parameters. You can use the macro apply
macro-name
with a '?' to display the help string for the macro keywords (if you
have defined these with the #macro keywords preprocessor command).