Cisco Sx350, Руководство CLI

Страница: 1247 / 1323

User Interface Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1246
66
To reset the command history buffer size to the default value, use the no form of
this command.
Syntax
history size
number-of-commands
no history size
Parameters
number-of-commands—Specifies the number of commands the system records
in its history buffer.
Default Configuration
The default command history buffer size is 10 commands.
Command Mode
Line Configuration Mode
User Guidelines
This command configures the command history buffer size for a particular line. It is
effective from the next time that the user logs in via console/telnet/ssh.
Use the terminal history size User EXEC mode command to configure the
command history buffer size for the current terminal session.
The allocated command history buffer is per terminal user, and is taken from a
shared buffer. If there is not enough space available in the shared buffer, the
command history buffer size cannot be increased above the default size.
Example
The following example changes the command history buffer size to 100 entries for
Telnet.
switchxxxxxx(config)#
line telnet
switchxxxxxx(config-line)#
history size 100