Cisco Sx350, Руководство CLI

Страница: 408 / 1323

Ethernet Configuration Commands
407 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
17
The following table describes the fields shown in the display.
Field Description
InOctets Number of received octets.
InUcastPkts Number of received Unicast packets.
InMcastPkts Number of received Unicast packets.
InBcastPkts Number of received broadcast packets.
OutOctets Number of transmitted octets.
OutUcastPkts Number of transmitted Unicast packets.
OutMcastPkts Nmber of transmitted Unicast packets.
OutBcastPkts Number of transmitted Broadcast
packets.
FCS Errors Number of frames received that are an
integral number of octets in length but do
not pass the FCS check.
Single Collision Frames Number of frames that are involved in a
single collision, and are subsequently
transmitted successfully.
Multiple Collision
Frames Number of frames that are involved in
more than one collision and are
subsequently transmitted successfully.
SQE Test Errors Number of times that the SQE TEST
ERROR is received. The SQE TEST
ERROR is set in accordance with the
rules for verification of the SQE detection
mechanism in the PLS Carrier Sense
Function as described in IEEE Std. 802.3,
2000 Edition, section 7.2.4.6.
Deferred Transmissions Number of frames for which the first
transmission attempt is delayed because
the medium is busy.
Late Collisions Number of times that a collision is
detected later than one slotTime into the
transmission of a packet.
Excessive Collisions Number of frames for which transmission
fails due to excessive collisions.
Oversize Packets Number of frames received that exceed
the maximum permitted frame size.
Internal MAC Rx Errors Number of frames for which reception
fails due to an internal MAC sublayer
receive error.