Cisco Sx350 Скачать руководство пользователя страница 650

Страница: 650 / 1323

IPv6 First Hop Security

649

Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide

Command Mode

Interface (Ethernet, Port Channel) Configuration mode

User Guidelines

Use this command to attach an RA Guard policy to a port.

Each time the command is used, it overrides the previous command within the
same policy.

If a policy specified by the

policy-name

argument is not defined, the command is

rejected.

Multiple policies with the vlan keyword can be attached to the same port if they
do not have common VLANs.

The set of rules that is applied to an input packet is built in the following way:

•

The rules, configured in the policy attached to the port on the VLAN on
which the packet arrived are added to the set.

•

The rules, configured in the policy attached to the VLAN are added to the
set if they have not been added.

•

The global rules are added to the set if they have not been added.

Use the no ipv6 nd raguard attach-policy command to detach all user-defined
policies attached to the port.

Use the no ipv6 nd raguard attach-policy

policy-name

command to detach the

specific policy from the port.

Examples

Example 1—In the following example, the RA Guard policy policy1 is attached to
the gi11 port:

switchxxxxxx(config)#

interface

gi11

switchxxxxxx(config-if)#

ipv6 nd raguard attach-policy

policy1

switchxxxxxx(config-if)#

exit

Example 2—In the following example, the RA Guard policy policy1 is attached to
the gi11 port and applied to VLANs 1-10 and 12-20:

switchxxxxxx(config)#

interface

gi11

Содержание Sx350












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Sx350

Отзывы:

Бренды по названию

Популярные бренды

Cisco Sx350, Руководство CLI

Результаты поиска

Содержание Sx350

Отзывы:

Бренды по названию

Популярные бренды