manualshive.com logo in svg

Cisco Sx350, Руководство CLI

Поделиться
Скачать
Cisco Sx350 Скачать руководство пользователя страница 624

IPv6 First Hop Security

623

Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide

29

29.14 ipv6 dhcp guard attach-policy (port 

mode)

To attach a DHCPv6 Guard policy to a specific port, use the ipv6 dhcp guard 
attach-policy command in Interface Configuration mode. To return to the default, 
use the no form of this command.

Syntax

ipv6 dhcp guard attach-policy 

policy-name 

[vlan 

vlan-list

]

no ipv6 dhcp guard attach-policy [

policy-name

]

Parameters

•

policy-name

—The DHCPv6 Guard policy name (up to 32 characters).

•

vlan 

vlan-list

—Specifies that the DHCPv6 Guard policy is to be attached to 

the VLAN(s) in 

vlan-list

. If the vlan keyword is not configured, the policy is 

applied to all VLANs on the device on which DHCPv6 Guard is enabled.

Default Configuration

The DHCPv6 Guard default policy is applied.

Command Mode

Interface (Ethernet, Port Channel) Configuration mode

User Guidelines

Use this command to attach a DHCPv6 Guard policy to a port.

Each time the command is used, it overrides the previous command within the 
same policy. 

If a policy specified by the 

policy-name

 argument is not defined, the command is 

rejected.

Multiple policies with the vlan keyword can be attached to the same port if they 
do not have common VLANs.

The set of rules that is applied to an input packet is built in the following way:

•

The rules, configured in the policy attached to the port on the VLAN on 
which the packet arrived are added to the set.

Содержание Sx350












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды