Using Advanced Phone Features
Using Star Codes
Cisco Small Business Pro IP Phone SPA525G (SIP) User Guide
81
4
•
Automatic Mode—Configures your phone to receive the time and date from
the phone server. Press the Right Arrow key to turn automatic mode to
On
or
Off
. Press Save.
•
NTP Server 1 and NTP Server 2—Configures your phone to receive the
time and date from a Network Time Protocol server. Enter the name or the IP
address of the server and press Save.
•
Set Current Time Manually—Press the Right Arrow key to choose the date
and time. Use the Right Arrow key to move between the year, month, date,
hour, and minute. Use the Up and Down Arrow keys to change the time.
Press Set.
NOTE
If your phone is connected to an administration server, any changes you make to the
date and time will be lost when rebooting the phone.
Using Star Codes
The SPA525G supports numerous “star codes” to access phone supplementary
services. These codes, which start with *, are entered before dialing a telephone
number and provide services. For example, to block caller ID (star code 67), you
would dial *67, followed by the telephone number you are calling.
Following is a list of supported star codes:
Code
Definition
03
Request media loopback for a call to monitor Voice over IP quality.
16
Activate Secure Call feature for all calls.* See
Using Secure Call,
page 68
.
17
Deactivate Secure Call feature for all calls.* See
Using Secure Call,
page 68
.
18
Activate Secure Call feature for a single call.* See
Using Secure Call,
page 68
.
