5-23
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-07
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Initial System Configuration
Step 3
You are asked whether to apply and save the configuration.
Apply and Save this configuration? [yes/no]:
•
To apply and save the configuration, type
y and
press
Enter
.
•
To abort the setup procedure without applying or saving the configuration (recommended if there
are errors), type
n
and press
Enter
.
Setup procedure aborted, no configuration changes made.
If the setup is aborted, the dialog is ended.
Step 4
If there are no errors, the system requests confirmation of either a yes or no answer, in order to prevent
mistakes.
Type the appropriate answer (
y
or
n
) and press
Enter
.
The running configuration would be overwritten by the changes you have just entered, are
you sure? [yes/no]:
The selected action is carried out by the system.
•
If the apply and save action is not confirmed (
no
), the setup is aborted.
Setup procedure aborted, no configuration changes made.
•
If the apply and save action is confirmed (
yes
), the configuration is applied and saved.
The new running configuration will be saved to the startup configuration.
Step 5
If the configuration was applied and saved, you may also save it to a file at a remote station.
Do you want to save a copy of the startup configuration file in a remote station? [no]:
To save the configuration to a remote station, type
y
and press
Enter
.
The system will ask for FTP path:
Enter a full FTP path of the remote destination:
Step 6
The system informs you that the configuration is complete.
Committing configuration...
Configuration completed successfully.
Saving configuration...
Writing general configuration file to temporary location...
Backing-up general configuration file...
Copy temporary file to final location...
Done!
