Wireless Networks
Basic Wireless Settings
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide
74
4
STEP 3
If you chose the default setting
B/G/N-Mixed,
the wireless bandwidth in the
Wireless Band Selection should be set at
20MHz (default).
If you choose
N-Only,
or
G/N Mixed
, in the Wireless Band Selection field, select the wireless bandwidth
on your network
(20MHz or 20/40MHz)
.
STEP 4
Optional and applicable to configure the
RV134W 5G Wireless Channel Width
settings.
STEP 5
In the
Wireless Channe
l
Width
field, select
80MHZ
(Default for RV134W).
STEP 6
In the
U-APSD (WMM Power Save)
field, check
Enable
to enable the
Unscheduled Automatic Power Save Delivery (U-APSD) feature, also referred to as
WMM Power Save, which allows the radio to conserve power.
U-APSD is a power-saving scheme optimized for real-time applications, such as
VoIP, transferring full-duplex data over WLAN. By classifying outgoing IP traffic as
voice data, these types of applications can increase battery life by approximately
25% and minimize transmit delays.
STEP 7
(Optional) In the
Wireless Table
, configure the settings of the four wireless
networks.
STEP 8
Click Save.
G/N-Mixed
Select this option if you have Wireless-G and
Wireless-N devices in your network.
A-Only
Select this option if you have only Wireless-A
devices in your network.
N/AC-Mixed
Select this option if you have Wireless-N and
Wireless-AC devices in your network.
A/N/AC-Mixed
Select this option if you have Wireless-A, Wireless-
N and Wireless-AC devices in your network. This is
the default setting for the RV134 5G
(recommended).
