Networking
Configuring LAN Settings
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide
29
3
When the Internet Connection Type is PPPoA:
In the
DSL Settings
section, enter the following information:
MAC Address
To set the MAC address of the device WAN port, do
one of the following:
To set the MAC address of the WAN port to your PC
MAC address, click
Clone My PC’s MAC
.
To specify a different MAC address, enter it in the
MAC
Address
field.
Transfer Mode
ATM
Multiplexing
Defines the way in which different protocols are
handled within a DSL virtual circuit. You can choose
between a Logical Link Control (LLC) encapsulation
and Virtual Channel (VC) multiplexing.
QoS Type
Select the DSL Quality of Service (QoS): Unspecified
Bit Rate (UBR), Constant Bit Rate (CBR), Variable Bit
Rate - real time (VBR-rt), Variable Bit Rate - non-real
time (VBR-nrt). CBR provides the best guarantee of low
latency; UBR provides none, but is typically used for
most broadband data services.
Pcr Rate
- When the QoS is set to CBR, VBR-rt, or VBR-
nrt, enter the Peak Cell Rate (PCR) in cells per second.
Scr Rate
- When the QoS is set to VBR-nrt or VBR-rt,
enter the Sustained Cell Rate (SCR) in cells per
second.
Auto Detect
Check
Enable
to enable or
Disable
to disable
automatic detection of the VPI and VCI values that
identify your line to the ATM network.
Virtual Circuit
The
Virtual Path Identifier (VPI)
and
Virtual Channel
Identifier (VCI)
are values used to identify your line to
your ISP’s ATM network.
SRA (Seamless Rate
Adaption)
Check
Enable
or
Disable
to enable or disable the SRA,
a protocol which, by decoupling the modulation and
framing layer, can change the transmission data rate
parameters (applied by the modulation layer).
