Cisco Prisma II, Руководство по установке

Страница: 98 / 184

Chapter 4 Operation Using ICIM
72 78-4025693-01 Rev D

To change a digit you have just typed, use the CAN (Cancel) function by
pressing the key. This deletes the last digit typed.
4 Press the key to enter the password. The ICIM display updates to show
whether your password entry was accepted.

If the password is accepted, the word Accepted appears in the menu, and
you are able to return to the MAIN menu.

If the password was rejected, the word Rejected appears in the menu.
Reasons for a password to be rejected include:
–
Entering more than eight digits for the password.
–
Pressing keys other than the 0-9 number keys.
–
Entering an incorrect password if a valid password has been entered.
If the password is rejected, press the key to return to the password
menu and re-enter the password as described in step 3 above.
To Change the User Password
After entering a user password, you are authorized to change it as long as the
current password is active. If more than 10 minutes elapse since your last keystroke,
this authorization expires and you must re-enter the current password before
changing to a new one.
Complete the following steps to change the user password.
1 Access the Password menu as shown in To Access the Password Menu (on page
70).
2 Use the key to scroll down until Change Psw is highlighted.
3
Press the key to select
Change Psw
.
4 When Change Psw /Shift Off appears, press the key to display Shift On ,
and then enter the eight digits of your new password, using the 0-9 number keys.