Cisco Octal-Port DMT ATU-C Line Card Скачать руководство пользователя страница 25

Страница: 25 / 32

Octal-Port DMT ATU-C Line Card

slot

Cisco IOS Release 12.1(6)DA

slot

To provision a slot for a specific card type, or to change the line coding for a flexi line card, use the
slot command.

slot slot# cardtype

Syntax Description

Defaults

None.

Command Modes

Global configuration.

Command History

slot#

The number of the slot you want to provision. The range is 1 to 38.

Note

The number of slots varies by chassis. The Cisco 6130 has
38 slots, the Cisco 6160 has 34 slots, and the Cisco 6260 has
32 slots.

cardtype

The line card type for which you want to configure the slot. The
valid card types are

•

ATUC-1-4DMT—4-port DMT card

•

ATUC-1-4DMT-I—4-port DMT over ISDN card

•

ATUC-4FLEXICAP—4-port flexi card configured as CAP

•

ATUC-4FLEXIDMT—4-port flexi card configured as DMT

•

ATUC-1-DMT8—8-port DMT card

•

ITUC-1-8IDSL—8-port IDSL card

•

STUC-4-2B1Q-DIR-1—4-port SDSL card

Note

Some line cards do not function in all NI-2 DSL systems.
For example, the Cisco 6100 system supports only a
dual-port CAP ATU-C line card. Consult the hardware
documentation for your DSL system to determine which line
cards it supports.

Release

Modification

12.0(5)DA

This command was introduced.

12.1(1)DA

New card types were added.

12.1(6)DA

New card types were added.

Содержание Octal-Port DMT ATU-C Line Card

































Результаты поиска

Содержание Octal-Port DMT ATU-C Line Card

Отзывы:

Похожие инструкции для Octal-Port DMT ATU-C Line Card

Бренды по названию

Популярные бренды

Cisco Octal-Port DMT ATU-C Line Card, Информационное руководство

Результаты поиска

Содержание Octal-Port DMT ATU-C Line Card

Отзывы:

Похожие инструкции для Octal-Port DMT ATU-C Line Card

Бренды по названию

Популярные бренды