Cisco Octal-Port DMT ATU-C Line Card, Информационное руководство

Страница: 14 / 32

Octal-Port DMT ATU-C Line Card
dmt bitrate
14
Cisco IOS Release 12.1(6)DA
Caution This command causes the port to retrain when you change the value of the bit rate parameter.
Setting a parameter to its current value does not cause a retrain. If a port is training when you change
the parameter, the port stops training and retrains to the new parameter.
Examples
In this example, the command sets the maximum interleaved bit rate of the default profile to 3200 kbps
downstream and 640 kbps upstream:
DSLAM# configure terminal
DSLAM(config)# dsl-profile default
DSLAM(config-dsl-prof)# dmt bitrate maximum interleaved downstream 3200 upstream 640
Related Commands
Table 2 Allowable Ranges and Default Values for DMT Bit Rates
Downstream Upstream
Configuration
Parameter Data
Path
Aggregate
Range
(kbps) Path
Range
(kbps) Path
Default
(kbps) Aggregate
Range
(kbps) Path
Range
(kbps) Path
Default
(kbps)
DMT bit rate max Fast 8064 to 32 8064 to 32 0 864 to 32 864 to 0 0
DMT bit rate min Fast 8064 to 32 8064 to 0 0 864 to 32 864 to 0 0
DMT bit rate max Interleaved 8064 to 32 8064 to 32 640 864 to 32 864 to 0 128
DMT bit rate min Interleaved 8064 to 32 8064 to 0 128 864 to 0 864 to 0 0
Command Description
show dsl profile Display a specific profile, all ports to which the profile is currently attached,
and those port settings.