1
Cisco IOS Release 12.1(6)DA
Octal-Port DMT ATU-C Line Card
This feature module describes the Cisco IOS support for the octal-port DMT ATU-C (8xDMT) line card.
It includes information on new and modified commands.
This document includes the following sections:
•
Feature Overview, page 1
•
Supported Platforms, page 4
•
Supported Standards, MIBs, and RFCs, page 5
•
Prerequisites, page 6
•
Configuration Tasks, page 6
•
Configuration Examples, page 9
•
Command Reference, page 10
•
Glossary, page 27
Feature Overview
The 8xDMT line card provides higher port density for the Cisco 6015, Cisco 6160, and Cisco 6260. This
line card:
•
Supports eight ADSL modem connections per card.
•
Converts ADSL modulation from the line card into digital data streams to and from the NI-2 card.
•
Negotiates the line rate with the customer premises equipment (CPE) when it trains and bases the
rate on line quality and distance.
•
Provides subscriber and port provisioning through DSL profiles.
–
Allows single latency—Fast or interleaved path selection.
–
Supports trellis encoding.
–
Supports bit swapping.
•
Interoperates with certain CPE. For more detailed information, see the
“Supported Platforms”
section on page 4
.
Note
Check with a Cisco customer representative to verify CPE compatibility with
the 8xDMT.
