Cisco NCS 1002 Скачать руководство пользователя страница 29

Страница: 29 / 68

0/PM0

NCS1K-2KW-AC

0.0

PO-PriMCU

CURRENT

4.00

0/PM1

NCS1K-2KW-AC

0.0

PO-PriMCU

CURRENT

4.00

Displays the firmware information of various hardware components of the NCS 1002 in the Cisco IOS XR
EXEC mode.

In the above output, some of the significant fields are:

• FPD Device—Name of the hardware component such as FPD, CFP, and so on.

• ATR—Attribute of the hardware component. Some of the attributes are:

• B—Backup Image

• S—Secure Image

• P—Protected Image

• Status— Upgrade status of the firmware. The different states are:

• CURRENT—The firmware version is the latest version.

• READY—The firmware of the FPD is ready for an upgrade.

• NOT READY—The firmware of the FPD is not ready for an upgrade.

• NEED UPGD—A newer firmware version is available in the installed image. It is recommended

that an upgrade be performed.

• RLOAD REQ—The upgrade has been completed, and the ISO image requires a reload.

• UPGD DONE—The firmware upgrade is successful.

• UPGD FAIL— The firmware upgrade has failed.

• BACK IMG—The firmware is corrupted. Reinstall the firmware.

• UPGD SKIP—The upgrade has been skipped because the installed firmware version is higher than

the one available in the image.

• Running—Current version of the firmware running on the FPD.

Step 2

show hw-module slice slice_number

Displays the slice and Datapath FPGA (DP-FPGA) information of the NCS 1002.

Example:

RP/0/RP0/CPU0:ios#

show hw-module slice 0

Wed Feb 28 04:01:45.828 UTC
Slice ID:

Status:

Provisioned

Client Bitrate:

Trunk Bitrate:

100

DP FPGA FW Type:

XMG1

DP FPGA FW Version:

01.01

HW Status:

CURRENT

Encryption Supported:

FALSE

LLDP Drop Enabled:

FALSE

Client Port -

Trunk Port

CoherentDSP0/0/0/5

CoherentDSP0/0/0/6

Traffic Split Percentage

System Setup and Software Installation Guide for Cisco NCS 1002

Perform Preliminary Checks

Verify Firmware Version

Содержание NCS 1002





































































Результаты поиска

Содержание NCS 1002

Отзывы:

Похожие инструкции для NCS 1002

Бренды по названию

Популярные бренды

Cisco NCS 1002, Руководство по настройке системы и установке программного обеспечения

Результаты поиска

Содержание NCS 1002

Отзывы:

Похожие инструкции для NCS 1002

Бренды по названию

Популярные бренды