Cisco MCS 7800 Series Скачать руководство пользователя страница 192

Страница: 192 / 234

Possible Explanation and Action

Description

Message

Verify that the host names of the TFTP server or
Cisco Unified Communications Manager are
configured properly in IPv6 DNS.

Consider using IPv6 addresses rather than host
names

IPv6 DNS could not resolve the name of
the TFTP server or Cisco Unified
Communications Manager.

DNS unknown IPv6 Host

Occurs if you attempted to install a version of
software on this phone that did not support
hardware changes on this phone.

Check the load ID that is assigned to the phone
(from Cisco Unified Communications Manager,
choose

Device

Phone

). Reenter the load that

displays on the phone.

The application that was downloaded is
not compatible with the phone hardware.

Load Rejected HC

If the phone has a static IP address, verify that the
default router is configured.

If you are using DHCP, the DHCP server has not
provided a default router. Check the DHCP server
configuration.

DHCP or static configuration did not
specify a default router.

No Default Router

If the phone has a static IP address, verify that the
IPv4 DNS server is configured.

If you are using DHCP, the DHCP server has not
provided a IPv4 DNS server. Check the DHCP
server configuration.

A name was specified but DHCP or static
IP configuration did not specify a IPv4
DNS server address.

No IPv4 DNS Server

If the phone has a static IP address, verify that the
IPv6 DNS server is configured.

If you are using DHCP, the DHCP server has not
provided a IPv6 DNS server. Check the DHCP
server configuration.

A name was specified but DHCP or static
IP configuration did not specify a IPv6
DNS server address.

No IPv6 DNS Server

The trust list is not configured on the Cisco
Unified Communications Manager, which does
not support security by default.

The trust list is not configured.

The CTL file or the ITL file is not
installed on the phone.

No Trust List Installed

Update the certificate.

FIPS requires that the RSA server
certificate is 2048 bits or greater.

Phone failed to register. Cert key size
is not FIPS compliant.

Configuration changes were likely made to the
phone in Cisco Unified Communications
Manager, and

Apply Config

was pressed so that

the changes take effect.

The phone is restarting due to on a
request from Cisco Unified
Communications Manager.

Restart requested by Cisco Unified
Communications Manager

Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager

178

Cisco IP Phone Status

Содержание MCS 7800 Series











































































































































































































































Результаты поиска

Содержание MCS 7800 Series

Отзывы:

Похожие инструкции для MCS 7800 Series

Бренды по названию

Популярные бренды

Cisco MCS 7800 Series, Руководство администратора

Результаты поиска

Содержание MCS 7800 Series

Отзывы:

Похожие инструкции для MCS 7800 Series

Бренды по названию

Популярные бренды