54
Appendix G: Installing the Network Protocols for Windows 95, 98, and ME
EtherFast 10/100 LAN Card
Appendix G: Installing the Network Protocols for
Windows 95, 98, and ME
1. From the
Start
Menu, select
Settings
and open the
Control Panel
. From the Control Panel, shown in Figure
G-1, double-click on the
Network icon
.
2. On the
Configuration
tab, select the
Linksys LNE100TX(v5) Fast Ethernet Adapter
from the list, shown in
Figure G-2. Click the
Add
button.
From this screen, you can also press the
Properties
button. You can then verify that the drivers are working
under Enhanced Mode on the Driver Type tab, or reconfigure the Card on the Advanced tab.
NOTE:
Before adding any network protocols,
make sure that the protocol is not already
installed. Never install duplicate protocols.
Figure G-1: Control Panel
Figure G-2: Configuration Tab