
14
Chapter 5: Configuring the Router
PPPoE
EtherFast Cable/DSL VPN Router with 4-Port 10/100 Switch
PPPoE
If your DSL provider says that you are connecting through PPPoE or if you normally enter a user name and
password to access the Internet, perform these steps:
A. Select
PPPoE
as the Connection Type.
B. Enter the
User Name
.
C. Enter the
Password
.
D. Enter the
Service Name
, if required.
E. Click the
Save Settings
button to save the settings, or click the
Cancel Changes
button to clear the settings
and start over.
F. When you are finished, click the
Status
tab, and then click the
Connect
button to start the connection.
Proceed to step 5.
RAS
RAS is a service used in Singapore only. If you are using a RAS connection, check with your ISP for the necessary
setup information.
When you are finished with the Setup tab, proceed to step 5.
PPTP
PPTP is a service used in Europe only. If you are using a PPTP connection, check with your ISP for the necessary
setup information.
When you are finished with the Setup tab, proceed to step 5.
Figure 5-5: Basic PPPoE Setup