Configuring H.323 gatekeeper settings
Cisco TelePresence ISDN Gateways v2.0 Online help (Printable format)
75 of 116
Configuring H.323 gatekeeper settings
You can configure the ISDN gateway to use a gatekeeper, which can make it easier for end-users to
make calls using directory numbers rather than requiring them to know the IP address or host name of
the ISDN gateway. You can register the ISDN gateway with an external gatekeeper or you can enable
its own built-in gatekeeper.
To configure gatekeeper settings, go to
Settings > H.323
.
Gatekeeper settings
Gatekeeper status
Gatekeeper settings
Refer to this table for assistance configuring the gatekeeper settings. After making any configuration
changes, click
Apply Changes
.
Field
Field description
Usage tips
H.323
gatekeeper
usage
Enables the ISDN gateway to use
an H.323 gatekeeper for
registration of numeric identifiers
for its conferences.
Choose from:
Disabled
: the gatekeeper is not
consulted when determining where to
direct a call. No gatekeeper
registrations will be attempted (and
existing registrations will be torn
down), regardless of other gatekeeper
settings.
Enabled
: the gatekeeper is consulted
to see if it knows where to direct a
call. The ISDN gateway will attempt to
make registrations with the
gatekeeper, and the gatekeeper will
be contacted for incoming and
outgoing calls. If the gatekeeper does
not respond, calls are still connected if
possible.
Required
: the gatekeeper is consulted
to determine where to direct a call. If
that fails, the call will not be allowed.