![Cisco ISDN GW 3241 Скачать руководство пользователя страница 59](http://html.mh-extra.com/html/cisco/isdn-gw-3241/isdn-gw-3241_online-help-manual_64939059.webp)
Configuring IP services
Cisco TelePresence ISDN Gateways v2.0 Online help (Printable format)
59 of 116
Configuring IP services
To configure IP services, go to
Network > Services
.
Use this page to control the type of services that may be accessed via Ethernet Ports A and B. You might
want to configure the services that are available on each port if you want to use one port for management
and the other for calls, for example, by only allowing web access on Port B. The ISDN gateway does not
allow IP to IP calls (calls between Ethernet ports). Refer to the table below for more details.
In addition to controlling the Ethernet interfaces over which a service operates, this page also allows an
administrator to specify the port number on which that service is provided. If the port number for a service
is changed, it is necessary to ensure that the new value chosen does not clash with the port number used
by any of the other services; it is not, however, normally necessary to use anything other than the pre-
configured default values.
Note that by default SNMP Traps are sent to port UDP port 162 (on the destination network management
station); this is configurable. For more information, refer to
Configuring SNMP settings
.
To reset all values back to their factory default settings, click
Reset to default
and then click
Apply
changes
.
Field
Field description
Usage tips
TCP service
Web
Enable/disable web access on the
appropriate port.
Web access is required to view and change the
ISDN gateway web pages and read online help
files. If you disable web access on Port A you
will need to use the serial console interface to
re-enable it.
If you require advanced security for the ISDN
gateway, disable web access.
If a port is disabled, this option will be
unavailable.
Secure web
Enable/disable secure (HTTPS) web
access on the appropriate port.
This field is only visible if the ISDN gateway has
the
Secure management (HTTPS)
feature key
or an
Encryption
feature key installed. For more
information about installing feature keys, refer to
Upgrading the firmware
.
By default, the ISDN gateway has its own SSL
certificate and private key. However, you can
upload a new private key and certificates if
required. For more information about SSL
certificates, refer to
Configuring SSL certificates
.
If a port is disabled, this option will be
unavailable.