Cisco ISDN GW 3241 страница 102 Скачать руководство пользователя | Manualshive

Страница: 102 / 116

background image

Working with Call Detail Records

Cisco TelePresence ISDN Gateways v2.0 Online help (Printable format)

102 of 116

Working with Call Detail Records

The ISDN gateway is able to generate Call Detail Records (CDR) which may be used for auditing and
billing purposes. When logging is enabled, records are generated whenever a new call is established
or terminated, when the auto attendant forwards a call, and so forth.

The ISDN gateway can display up to 20 pages of Call Detail Records. However, the ISDN gateway is
not intended to provide long-term storage of Call Detail Records. You must download the Call Detail
Records and store them elsewhere.

To use the CDR feature, there must be a 256 Mb compact flash card available - in the slot in the front
of the unit. If there is no compact flash card present, and you have enabled CDR logging, errors will be
recorded in the Event log.

When enabled, the CDR log is stored on the compact flash card and displayed on the

Events > CDR

log

page. You can either view the CDR log on that page, or you can download it as an XML file. You

cannot read from the compact flash card using any device other than the ISDN gateway.

When the CDR log is full, the oldest logs are overwritten.

To view and control the CDR log, go to

Events > CDR log

. Refer to the tables below for details of the

options available and a description of the information displayed.



Call Detail Record log controls



Call Detail Record log

Call Detail Record log controls

The CDR log can contain a lot of information. The controls in this section help you to select the
information for display that you find most useful. When you have finished making changes, click

Update display

to make those changes take effect. Refer to the table below for a description of the

options:

Field

Field description

Usage tips

Current
status

This field indicates whether CDR logging
is enabled or disabled. Use the two
buttons (

Enable logging

and

Disable

logging

) to change status. When you

enable logging, the ISDN gateway writes
the CDRs to the compact flash card.

Enabling or disabling CDR logging has
immediate effect. There is no need to
press

Update display

after clicking one

of these buttons.

Ensure there is a compact flash card
available - either in the slot on the front
of the unit or internally.

Messages
logged

The current number of CDRs in the log.

Filter string

Use this field to limit the scope of the
displayed Call Detail Records. The filter
string is not case-sensitive.

The filter string applies to the

Message

field in the log display. If a particular
record has expanded details, the filter
string will apply to these as well.

«
...
100
101
102
103
104
...
»

Содержание ISDN GW 3241





















































































































Отзывы:

Нет отзывов

Похожие инструкции для ISDN GW 3241

Бренд: ABB Страницы: 44

Voice Gateway H3C VG 10-10

Бренд: H3C Страницы: 31

SR6602-I AI Series

Бренд: H3C Страницы: 80

SR6602-I AI Series

Бренд: H3C Страницы: 33

SecPath M9000 Series

Бренд: H3C Страницы: 4

SecPath M9000 Series

Бренд: H3C Страницы: 15

MSR3610-I Series

Бренд: H3C Страницы: 5

SecPath M9000 Series

Бренд: H3C Страницы: 57

Бренд: Ubee Страницы: 114

Бренд: Ubee Страницы: 105

Бренд: Ubee Страницы: 96

Бренд: Ubee Страницы: 96

Subnet16 BIS Z-GW-001-IND

Бренд: Balluff Страницы: 2

Бренд: Digi Страницы: 6

P-661HW-D Series

Бренд: ZyXEL Communications Страницы: 146

Бренд: Zenitel Страницы: 14

Бренд: Gree Страницы: 67

Бренд: Cisco Страницы: 146

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды