3-13
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Chapter 3 Provisioning the Cisco HSI
H.323 Stack Configuration
RAS Parameters
The parameters in
Table 3-8
are required for RAS stack initialization. To modify the RAS parameters,
use the ras MML name variable for the
prov-add
,
prov-dlt,
and
prov-ed
commands.
In the following example, the
prov-add
command sets the RAS parameter maxfail to the value 3.
Example
prov-add:name=ras,maxfail=3
The array index [i] in some of the parameter names in the first column of
Table 3-8
must be replaced
with a valid braced index from 1 to 20, and must be continuous and unique (that is, it must contain no
duplicates).
The Update Type
column
in
Table 3-8
shows when the change to a parameter takes effect after it is
modified:
•
Immediate means that the effect of the change is immediate.
•
Start means that the application needs to be restarted for the change to take effect.
•
Next Call means that the next call has the new parameter set.
Note
Immediate and next call update types are dynamic system data.
Note
The RAS parameter overlappedSending is not available here because it has been combined with the
Q.931
overlappedSending
parameter. If you set the Q.931 overlappedSending parameter, you also set the
the RAS overlappedSending parameter.
Note
The asterisk (*) after a parameter name in the first column of
Table 3-8
denotes a mandatory RADVision
parameter with an inbuilt default value that will be used if the value is not set in provisioning.
Table 3-8
RAS Parameters
Parameter Name
Description
Type
Example
Update Type
manualRAS
If this parameter is present,
the stack does not perform
automatic RAS procedures
(it waits to be driven by the
application).
NULL
—
Start
responseTimeOut*
The time (in seconds) that
the stack waits until it
notifies the application that
the called party has failed to
respond to a transaction.
INTEGER(1, 200)
10
Immediate
maxFail*
Maximum number of retry
gatekeeper registration
attempts.
INTEGER(1, 200)
3
Immediate
Содержание HSI 4.1
Страница 12: ...Contents xii Cisco H 323 Signaling Interface User Guide OL 4806 01 Rev A14 ...
Страница 180: ...C 20 Cisco H 323 Signaling Interface User Guide OL 4806 01 Rev A14 Appendix C Example of an HSI Configuration File ...
Страница 184: ...D 4 Cisco H 323 Signaling Interface User Guide OL 4806 01 Rev A14 Appendix D E ISUP Name to Cause Value Lookup ...
Страница 188: ...E 4 Cisco H 323 Signaling Interface User Guide OL 4806 01 Rev A14 Appendix E E ISUP Cause Value to Name Lookup ...