2-7
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Chapter 2 Installing and Configuring Cisco HSI Software
Installing the Cisco HSI
Step 14
Type the gatekeeper ID (see
Table 2-2
) and press
Enter
.
Note
The gatekeeper ID must match the entry configured in the gatekeeper.
The following text displays:
Enter E-ISUP Host Port
Step 15
Type the E-ISUP host port (see
Table 2-2
) and press
Enter
.
Note
The E-ISUP host port is typically 8003, but it must match the peer port setting of the IPLNK
object in the PGW 2200 configuration.
The following text displays:
Enter VSC1 Name
Step 16
Type the VSC1 name and press
Enter
.
Note
The VSCI name is either the DNS host name (if DNS is configured) or the IP address of the
PGW 2200.
The following text displays:
Enter VSC1 Port
Step 17
Type the VSC1 port number (see
Table 2-2
) and press
Enter
.
Note
The VSCI port is typically 8003, but it must match the port setting of the IPLNK object in the
PGW 2200 configuration.
The following text displays:
Enter Installation NodeId
Step 18
Type the installation node ID (see
Table 2-2
) and press
Enter
.
Note
The installation node ID is a text field typically used by network designers for identification
purposes. Entering a value in this field does not affect functionality.
The following text displays:
Enter Hardware Platform
Step 19
Type the hardware platform name (see
Table 2-2
) and press
Enter
(typically, accept the default platform
name)
.
The following text displays:
Enter Installation Location
Содержание HSI 4.1
Страница 12: ...Contents xii Cisco H 323 Signaling Interface User Guide OL 4806 01 Rev A14 ...
Страница 180: ...C 20 Cisco H 323 Signaling Interface User Guide OL 4806 01 Rev A14 Appendix C Example of an HSI Configuration File ...
Страница 184: ...D 4 Cisco H 323 Signaling Interface User Guide OL 4806 01 Rev A14 Appendix D E ISUP Name to Cause Value Lookup ...
Страница 188: ...E 4 Cisco H 323 Signaling Interface User Guide OL 4806 01 Rev A14 Appendix E E ISUP Cause Value to Name Lookup ...