Cisco D9824, Руководство по установке и настройке

Страница: 101 / 416

Setup Menu
79
Menu Item Description Parameters
SNMP Read Write
Community String Sets the password to write data to a
device.
This is used when communicating
with a device within an SNMP
environment.
Up to 31 alphanumeric characters in
length. This string is case-sensitive.
The default community string is:
public.
Reset Credentials If for some reason, you cannot access
the decoder (due to a forgotten
password or corrupted data), the
recovery procedure for the decoder is
as follows:
Using the keypad, choose this field on
the front panel menu. A default login
username and randomly generated
password will be displayed on the
front panel display for approximately
30 seconds. The new account will
have Admin privileges. It is
recommended that this account be
replaced by a login
username/password chosen by the
administrator. To change the
username and password, you must be
an Admin user. Refer to
Setting
Admin User Privileges via a
Telnet/SSH Connection
(on page 31).
Note: After this recovery procedure,
all existing user accounts will be lost.
Password
Complexity Sets the password complexity for all
users. The complexity level changes
will only affect the new user accounts
and password changes. It will not
affect existing accounts.
No Checking, Minimal Checking, or
Full Complexity Checking
For more information, see the
Password Complexity table below.
SNTP Server Sets the NTP server address. If the
NTP server address is not set (0.0.0.0),
the IRD will not attempt to connect to
the server.
12 digits in length (###.###.###.###)
SNTP Enable Periodically request NTP timestamps
from the NTP server and to
synchronize its system (i.e., non-DVB
related) time with the NTP server.
Yes or No