3-12
Cisco Content Delivery Engine Hardware Installation Guide
OL-13478-01
Chapter 3 Installing the Software and Initially Configuring a CDE
Running the BIOS Setup Utility
Step 11
Use the arrow
keys to return to the Advanced menu. Choose
Console Redirection
and press
Enter
. The
Console Redirection screen appears (see
).
Figure 3-18
Console Redirection Screen
a.
Set the
Com Port Address
option to
On-board COM A
.
b.
Set the
Baud Rate
option
to
9600
.
c.
Set the
Continue C.R. after POST:
option to
On
.
Step 12
When you are finished, navigate to the
Exit
submenu and choose
Exit Saving Changes
. Press
Yes
when
prompted (see
).
Figure 3-19
Exit Saving Changes Screen
Step 13
Ensure that the CD with the CDS software image is in the USB CD drive and press
Enter
to confirm and
reboot the system. Your configuration is saved, you exit the BIOS Setup menu, and the system reboots.
a.
Sometimes the USB CD-ROM drive is not picked up by the BIOS after the first power-on. In this
case, the CD-ROM drive is not present in the above Hard Drive element list. Press the
Reset
button
(not the Power button) and try again. If it still fails, try a different USB CD-ROM drive.
