2-3
Cisco Content Delivery Engine Hardware Installation Guide
OL-13478-01
Chapter 2 Installing the CDEs
Safety Warnings
Warning
For Nordic countries (Norway, Finland, Sweden and Denmark) this system must be installed
in a Restricted Access Location, where the voltage of the main ground connection of all
equipment is the same (equipotential earth) and the system is connected to a grounded
electrical outlet.
Statement 328
Warning
Do not work on the system or connect or disconnect cables during periods of lightning
activity.
Statement 1001
Warning
Class 1 laser product.
Statement 1008
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the
equipment in the absence of a suitably installed ground conductor. Contact the appropriate
electrical inspection authority or an electrician if you are uncertain that suitable grounding
is available.
Statement 1024
Warning
Class 1 LED product.
Statement 1027
Warning
This unit might have more than one power supply connection. All connections must be
removed to de-energize the unit.
Statement 1028
Warning
Ultimate disposal of this product should be handled according to all national laws and
regulations.
Statement 1040
Warning
This product requires short-circuit (overcurrent) protection, to be provided as part of the
building installation. Install only in accordance with national and local wiring regulations.
Statement 1045
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury.
Before you work on any equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents. Use the
statement number provided at the end of each warning to locate its translation in the
translated safety warnings that accompanied this device.
Statement 1071
Warning
This product is not intended to be directly connected to the Cable Distribution System.
Additional regulatory compliance and legal requirements may apply for direct connection
to the Cable Distribution System. This product may connect to the Cable Distribution System
ONLY through a device that is approved for direct connection.
Statement 1078
