Cisco Content Delivery Engine CDE100, Руководство по установке оборудования

Страница: 23 / 56

2-9
Cisco Content Delivery Engine Hardware Installation Guide
OL-13478-01
Chapter 2 Installing the CDEs
Installing the CDEs
Step 2
To access the disk drives on a CDE-200 only, you must first remove the front cover by turning the keys
on the left and right sides of the cover and removing it from the CDE-200 (see
Figure 2-5 ).
Figure 2-5 CDE-200 Front Cover
Step 3 Unlock the latch by pressing the safety lock button on the front of the latch (see Figure 2-6 ).
Step 4
Unlatch the disk drive tray from the locking clip and swing open the main latch (see Figure 2-6 ).
Step 5 Carefully pull the disk drive out of its drive tray slot.
Step 6
Insert a new disk drive into the drive tray slot and make sure it is properly seated.
Step 7 Close the latch completely and lock it in place by pressing the safety lock button.
Figure 2-6 Chassis Drive Tray Installation and Removal
211765
1 2