-8
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
OL-3418-02 B0
Appendix
Getting Started
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 5350 Software (C5350-JS-M), Version 12.1(0.2.0)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 23-Feb-00 22:35 by beliu
Image text-base:0x60008908, data-base:0x61200000
cisco AS5400 (R7K) processor (revision L) with 65536K/131072K bytes of
memory.
Processor board ID JAB034608LW
R7000 CPU at 250Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3
Cache
Last reset from unexpected value
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x31,
Board Hardware Version 3.22, Item Number 800-5171-01,
Board Revision 017, Serial Number JAB034608LW,
PLD/ISP Version 0.0, Manufacture Date 4-Jan-2000.
Processor 0xFF, MAC Address 0x03096F808E
Backplane HW Revision 17.43
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
108 terminal line(s)
512K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)
Press RETURN to get started!
Step 2
When the following message appears, enter yes to continue:
Would you like to enter the initial configuration dialog? [yes/no]: yes
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.
Step 3
When the following message appears, enter no to configure all interfaces. Note that, if you enter yes,
your system will not be configured correctly.
Basic management setup configures only enough connectivity
for management of the system, extended setup will ask you
to configure each interface on the system
Would you like to enter basic management setup? [yes/no]: no
Step 4
When the following message appears, enter no to bypass the current interface summary:
First, would you like to see the current interface summary? [yes]: no