Cisco 9300-EX, Руководство по установке оборудования

Страница: 29 / 74

Two customer-supplied 12-24 or 10-32 screws used
to attach each slider rail to the rack 2 Slider rail with screw holes aligned to screw holes in
rack 1
c) Repeat Step 3 to attach the other slider rail to the other side of the rack.
To make sure that the slider rails are at the same level, you should use a level tool, tape measure, or carefully count
the screw holes in the vertical mounting rails.
Step 5 Insert the switch into the rack and attach it as follows:
a) Holding the switch with both hands, position the two rear rack-mount brackets on the switch between the rack or
cabinet posts that do not have slider rails attached to them (see the following figure).
Cisco Nexus 93180YC-EX ACI Mode Hardware Installation Guide
19
Installing the Switch Chassis
Installing the Switch