Cisco 9300-EX Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 74

background image

Screw holes (6) for attaching rack mounting
brackets

8

Console port (RS232 port)

3

Screw holes (2) for attaching grounding lug

9

Out-of-band management port (RJ-45 port)

4

Chassis LEDs (Beacon [BCN] and Status [STS])

5

USB support is limited to USB 2.0 devices that use less than 2.5 W (less than 0.5 A inclusive of surge
current). Devices, such as external hard drives, that instantaneously draw more than 0.5 A are not supported.

Note

Depending on whether you plan to position the ports in a hot or cold aisle, you can order the fan and power
supply modules with port-side intake or port-side exhaust airflow. To determine the airflow direction of the
modules installed in your switch, see the following table.

Port-Side Exhaust Airflow Coloring

Port-Side Intake Airflow Coloring

Replaceable Modules

Blue

Burgundy

Fans

Blue

Burgundy

AC power supplies

White

HVAC/HVDC power supplies

Gray

Green

DC power supplies

The fan and power supply modules are field replaceable and you can replace one fan module or one power
supply module during operations so long as the other modules are installed and operating. If you have only
one power supply installed, you can install the replacement power supply in the open slot before removing
the original power supply.

All of the fan and power supply modules must have the same direction of airflow. Otherwise, the switch
can overheat and shut down. If you are installing a dual-direction power supply, that module will
automatically use the same airflow direction as the other modules in the switch.

Note

If the switch has port-side intake airflow (burgundy coloring for fan modules), you must locate the ports
in the cold aisle. If the switch has port-side exhaust airflow (blue coloring for fan modules), you must
locate the ports in the hot aisle. If you locate the air intake in a hot aisle, the switch can overheat and shut
down.

Caution

The switch supports the Fabric Extenders (FEXs) listed at

https://www.cisco.com/c/en/us/td/docs/switches/

datacenter/nexus9000/hw/interoperability/fexmatrix/fextables.html

Cisco Nexus 93180YC-EX ACI Mode Hardware Installation Guide

3

Overview

Overview

«
...
11
12
13
14
15
...
»

Содержание 9300-EX











































































Отзывы:

Нет отзывов

Похожие инструкции для 9300-EX

Бренд: Painless Performance Products Страницы: 2

Бренд: 3Com Страницы: 2

CoreBuilder 5000

Бренд: 3Com Страницы: 16

CoreBuilder 9000

Бренд: 3Com Страницы: 24

Бренд: ADDER Страницы: 46

Бренд: Aruba Страницы: 6

C4-SW120277 Series

Бренд: Control 4 Страницы: 4

GenReady Series 005448-2

Бренд: Generac Power Systems Страницы: 4

Бренд: Enttec Страницы: 22

SwitchMan USB-Combo SW2

Бренд: Raritan Страницы: 2

Бренд: Comtrend Corporation Страницы: 2

Бренд: Kramer Страницы: 2

SIL IntelliPoint RF S*R*L Series

Бренд: Ametek Страницы: 93

IES8242MPp9H-S-DR

Бренд: OTS Страницы: 3

Бренд: Jerguson Страницы: 4

Бренд: Lancom Страницы: 21

Бренд: Racal Instruments Страницы: 53

CheetaHub Power-3004E

Бренд: Accton Technology Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды