manualshive.com logo in svg

Cisco 500 Series, Руководство по настройке

HAN 500 Series - качественный продукт с подробным руководством по монтажу и использованию. Скачайте бесплатное руководство по инструкциям на нашем сайте manualshive.com. Идеальное решение для тех, кто ценит качество и удобство. Будьте уверены в правильной установке и безопасном использовании вашего продукта.

Поделиться
Скачать
background image

 

30-42

Cisco Security Appliance Command Line Configuration Guide

OL-12172-03

Chapter 30      Configuring Connection Profiles, Group Policies, and Users

  Group Policies

hostname(config-group-policy)# 

no password-storage

hostname(config-group-policy)# 

Specifying the 

no

 form enables inheritance of a value for password-storage from another group policy.

This command does not apply to interactive hardware client authentication or individual user 
authentication for hardware clients.

The following example shows how to enable password storage for the group policy named

 

FirstGroup:

hostname(config)#

 group-policy FirstGroup attributes

hostname(config-group-policy)# 

password-storage enable

hostname(config-group-policy)# 

Step 2

Specify whether to enable IP compression, which is disabled by default.

hostname(config-group-policy)# 

ip-comp

 {

enable 

| 

disable

}

hostname(config-group-policy)# 

To enable LZS IP compression, enter the 

ip-comp

 command with the 

enable 

keyword

 

in group-policy 

configuration mode. To disable IP compression, enter the 

ip-comp 

command with the 

disable 

keyword.

To remove the

 ip-comp

 attribute from the running configuration, enter the 

no

 form of this command. 

This enables inheritance of a value from another group policy.

hostname(config-group-policy)# 

no ip-comp

hostname(config-group-policy)# 

Enabling data compression might speed up data transmission rates for remote dial-in users connecting 
with modems.

Caution

Data compression increases the memory requirement and CPU usage for each user session and 
consequently decreases the overall throughput of the security appliance. For this reason, we recommend 
that you enable data compression only for remote users connecting with a modem. Design a group policy 
specific to modem users, and enable compression only for them.

Step 3

Specify whether to require that users reauthenticate on IKE rekey by using the 

re-xauth 

command with 

the 

enable 

keyword in group-policy configuration mode. If you enable reauthentication on IKE rekey, 

the security appliance prompts the user to enter a username and password during initial Phase 1 IKE 
negotiation and also prompts for user authentication whenever an IKE rekey occurs. Reauthentication 
provides additional security.

If the configured rekey interval is very short, users might find the repeated authorization requests 
inconvenient. To avoid repeated authorization requests, disable reauthentication. To check the 
configured rekey interval, in monitoring mode, enter the 

show crypto ipsec sa

 command to view the 

security association lifetime in seconds and lifetime in kilobytes of data. To disable user reauthentication 
on IKE rekey, enter the 

disable

 keyword. Reauthentication on IKE rekey is disabled by default.

hostname(config-group-policy)# 

re-xauth 

{

enable | disable

}

hostname(config-group-policy)# 

To enable inheritance of a value for reauthentication on IKE rekey from another group policy, remove 
the re-xauth attribute from the running configuration by entering the 

no

 form of this command.

hostname(config-group-policy)# 

no re-xauth

hostname(config-group-policy)# 

Note

Reauthentication fails if there is no user at the other end of the connection.

Содержание 500 Series





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 500 Series

Garmin FUSION Apollo MS-WB670 Owner'S Manual preview
FUSION Apollo MS-WB670
Бренд: Garmin Страницы: 44
Xantech MRC88M Installation Instructions Manual preview
MRC88M
Бренд: Xantech Страницы: 102
lee handels Happy Call Series Manual And Security Instructions preview
Happy Call Series
Бренд: lee handels Страницы: 13
Zenith F-986 Installation And Operating Manual preview
F-986
Бренд: Zenith Страницы: 20
New lift FST-2XT MRL Short Instructions preview
FST-2XT MRL
Бренд: New lift Страницы: 32
Yealink MVC400-C4-000 Manual preview
MVC400-C4-000
Бренд: Yealink Страницы: 6
RCA RS2047 User Manual preview
RS2047
Бренд: RCA Страницы: 11
ETC Insight 2x User Manual preview
Insight 2x
Бренд: ETC Страницы: 386
UNAC BENINCA DIVA.3 Manual preview
BENINCA DIVA.3
Бренд: UNAC Страницы: 76
Majestic TT 45CD Manual preview
TT 45CD
Бренд: Majestic Страницы: 41
Vaillant VR 90 Operating And Installation Manual preview
VR 90
Бренд: Vaillant Страницы: 32
DSPPA D6201 User Manual preview
D6201
Бренд: DSPPA Страницы: 28
Raven SmarTrax Calibration And Operation Manual preview
SmarTrax
Бренд: Raven Страницы: 156
usa-spec P15-ACUxl Owner'S Manual preview
P15-ACUxl
Бренд: usa-spec Страницы: 14
Vista TCS Installation Instructions preview
TCS
Бренд: Vista Страницы: 2
Marantz ED-5.1 Service Manual preview
ED-5.1
Бренд: Marantz Страницы: 23
Amatrol 890-FTS1 Manual preview
890-FTS1
Бренд: Amatrol Страницы: 12
Kinova Communication system User Manual preview
Communication system
Бренд: Kinova Страницы: 55

Бренды по названию

Популярные бренды

Загрузить еще бренды