manualshive.com logo in svg

Cisco 500 Series, Руководство по настройке

HAN 500 Series - качественный продукт с подробным руководством по монтажу и использованию. Скачайте бесплатное руководство по инструкциям на нашем сайте manualshive.com. Идеальное решение для тех, кто ценит качество и удобство. Будьте уверены в правильной установке и безопасном использовании вашего продукта.

Поделиться
Скачать
background image

 

29-5

Cisco Security Appliance Command Line Configuration Guide

OL-12172-03

Chapter 29      Setting General IPSec VPN Parameters

  Understanding Load Balancing

Note

You can have the browser automatically start an application by including the application name at the end 
of the URL; for example: 

https://support/updates/vpnclient.exe.

Step 3

To define a set of client-update parameters for a particular ipsec-ra tunnel group, do the following. In 
tunnel-group ipsec-attributes mode, specify the tunnel-group name and its type, the URL or IP address 
from which to get the updated image, and a revision number. If the user’s client’s revision number 
matches one of the specified revision numbers, there is no need to update the client; for example, for a 
Windows client:

hostname(config)# 

tunnel-group remotegrp type ipsec-ra

hostname(config)# 

tunnel-group remotegrp ipsec-attributes

hostname(config-tunnel-ipsec)# 

client-update type windows url https://support/updates/ 

rev-nums 4.6.1

hostname(config-tunnel-ipsec)# 

Step 4

Optionally, you can send a notice to active users with outdated Windows clients that their client needs 
updating. For these users, a pop-up window appears, offering them the opportunity to launch a browser 
and download the updated software from the site that you specified in the URL. The only part of this 
message that you can configure is the URL. (See Step 2 or 3.) Users who are not active get a notification 
message the next time they log on. You can send this notice to all active clients on all tunnel groups, or 
you can send it to clients on a particular tunnel group. For example, to notify all active clients on all 
tunnel groups, you would enter the following command in privileged EXEC mode:

hostname# 

client-update all

hostname# 

If the user’s client’s revision number matches one of the specified revision numbers, there is no need to 
update the client, and no notification message is sent to the user. VPN 3002 clients update without user 
intervention and users receive no notification message.

Note

If you specify the client-update type as 

windows

 (specifying all Windows-based platforms) and later 

want to enter a client-update type of 

win9x

 or 

winnt

 for the same entity, you must first remove the 

windows client type with the 

no

 form of the command, then use new client-update commands to specify 

the new client types.

Understanding Load Balancing

If you have a remote-access configuration in which you are using two or more security appliances or 
VPN Concentrators connected on the same network to handle remote sessions, you can configure these 
devices to share their session load. This feature is called

 load balancing

. To implement load balancing, 

you group together logically two or more devices on the same private LAN-to-LAN network, private 
subnet, and public subnet into a 

virtual cluster.

 

All devices in the virtual cluster carry session loads. Load balancing directs session traffic to the least 
loaded device in the cluster, thus distributing the load among all devices. It makes efficient use of system 
resources and provides increased performance and high availability. 

One device in the virtual cluster, the 

virtual cluster master

, directs incoming traffic to the other devices, 

called 

secondary devices

. The virtual cluster master monitors all devices in the cluster, keeps track of 

how busy each is, and distributes the session load accordingly. The role of virtual cluster master is not 

Содержание 500 Series





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 500 Series

Racal Instruments 1266 Manual preview
1266
Бренд: Racal Instruments Страницы: 64
Harman JBL L75ms Quick Start Manual preview
JBL L75ms
Бренд: Harman Страницы: 10
T+A CARUSO BLU Firmware Update preview
CARUSO BLU
Бренд: T+A Страницы: 2
Yealink CP935W Quick Start Manual preview
CP935W
Бренд: Yealink Страницы: 8
Panasonic SC-PM250 Operating Instructions preview
SC-PM250
Бренд: Panasonic Страницы: 2
Daewoo MC-5911SC Service Manual preview
MC-5911SC
Бренд: Daewoo Страницы: 21
FAAC MASTER-B Manual preview
MASTER-B
Бренд: FAAC Страницы: 16
Jensen JWM40 Quick Reference Manual preview
JWM40
Бренд: Jensen Страницы: 2
Daewoo AXL-125 Service Manual preview
AXL-125
Бренд: Daewoo Страницы: 22
ASA Electronics Jensen JHD40BT Quick Reference Manual preview
Jensen JHD40BT
Бренд: ASA Electronics Страницы: 2
Magnavox AS 9400 Quick Manual preview
AS 9400
Бренд: Magnavox Страницы: 12
Anker A3142 Owner'S Manual preview
A3142
Бренд: Anker Страницы: 19
Alpine KTX-TCMS-5 Installation Kit preview
KTX-TCMS-5
Бренд: Alpine Страницы: 8
Sven SPS-818 Operation Manual preview
SPS-818
Бренд: Sven Страницы: 12
EMX Industries, Inc. 721H5 Operation Manual preview
721H5
Бренд: EMX Industries, Inc. Страницы: 19
Panasonic SC-HC28DB Operating Instructions Manual preview
SC-HC28DB
Бренд: Panasonic Страницы: 20
Panasonic SC-HC55 Owner'S Manual preview
SC-HC55
Бренд: Panasonic Страницы: 28
RCA RS2202 Instruction Manual preview
RS2202
Бренд: RCA Страницы: 68

Бренды по названию

Популярные бренды

Загрузить еще бренды