manualshive.com logo in svg

Cisco 500 Series, Руководство по настройке

HAN 500 Series - качественный продукт с подробным руководством по монтажу и использованию. Скачайте бесплатное руководство по инструкциям на нашем сайте manualshive.com. Идеальное решение для тех, кто ценит качество и удобство. Будьте уверены в правильной установке и безопасном использовании вашего продукта.

Поделиться
Скачать
background image

 

13-13

Cisco Security Appliance Command Line Configuration Guide

OL-12172-03

Chapter 13      Configuring AAA Servers and the Local Database

  Configuring an LDAP Server

Note

If you do not configure SASL, we strongly recommend that you secure LDAP communications with 
SSL. See the 

ldap-over-ssl

 command in the 

Cisco Security Appliance Command Reference

. 

When user LDAP authentication has succeeded, the LDAP server returns the attributes for the 
authenticated user. For VPN authentication, these attributes generally include authorization data which 
is applied to the VPN session. Thus, using LDAP accomplishes authentication and authorization in a 
single step.

Securing LDAP Authentication with SASL

The security appliance supports the following SASL mechanisms, listed in order of increasing strength:

•

Digest-MD5 — The security appliance responds to the LDAP server with an MD5 value computed 
from the username and password.

•

Kerberos — The security appliance responds to the LDAP server by sending the username and realm 
using the GSSAPI (Generic Security Services Application Programming Interface) Kerberos 
mechanism.

You can configure the security appliance and LDAP server to support any combination of these SASL 
mechanisms. If you configure multiple mechanisms, the security appliance retrieves the list of SASL 
mechanisms configured on the server and sets the authentication mechanism to the strongest mechanism 
configured on both the security appliance and the server. For example, if both the LDAP server and the 
security appliance support both mechanisms, the security appliance selects Kerberos, the stronger of the 
mechanisms.

The following example configures the security appliance for authentication to an LDAP directory server 
named ldap_dir_1 using the digest-MD5 SASL mechanism, and communicating over an SSL-secured 
connection:

hostname(config)# 

aaa-server ldap_dir_1 protocol ldap

hostname(config-aaa-server-group)# 

aaa-server ldap_dir_1 host 10.1.1.4

hostname(config-aaa-server-host)# 

sasl-mechanism digest-md5

hostname(config-aaa-server-host)# 

ldap-over-ssl enable

hostname(config-aaa-server-host)#

Setting the LDAP Server Type

The security appliance supports LDAP version 3 and is compatible with the Sun Microsystems JAVA 
System Directory Server (formerly named the Sun ONE Directory Server), the Microsoft Active 
Directory, and other LDAPv3 directory servers.

By default, the security appliance auto-detects whether it is connected to a Microsoft Active Directory, 
a Sun LDAP directory server, or a generic LDAPv3 directory server. However, if auto-detection fails to 
determine the LDAP server type, and you know the server is either a Microsoft, Sun or generic LDAP 
server, you can manually configure the server type using the keywords 

sun

, 

microsoft

, or 

generic

. The 

following example sets the LDAP directory server ldap_dir_1 to the Sun Microsystems type:

hostname(config)# 

aaa-server ldap_dir_1 protocol ldap

hostname(config-aaa-server-group)# 

aaa-server ldap_dir_1 host 10.1.1.4 

hostname(config-aaa-server-host)# 

server-type sun

hostname(config-aaa-server-host)#

Содержание 500 Series





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 500 Series

Samsung MX-F870 Service Manual preview
MX-F870
Бренд: Samsung Страницы: 70
Samsung MM-L7 Manual Del Usuario preview
MM-L7
Бренд: Samsung Страницы: 21
Samsung MM-ZB9 Service Manual preview
MM-ZB9
Бренд: Samsung Страницы: 28
2N NetSpeaker Quick Start Manual preview
NetSpeaker
Бренд: 2N Страницы: 23
2VV AirGENIO SUPERIOR Manual preview
AirGENIO SUPERIOR
Бренд: 2VV Страницы: 27
2N Netstar Assistant Manual preview
Netstar
Бренд: 2N Страницы: 91
Yealink MVC Series Quick Start Manual preview
MVC Series
Бренд: Yealink Страницы: 6
Yealink MeetingSpace VC800 Deployment Manual preview
MeetingSpace VC800
Бренд: Yealink Страницы: 6
Yealink MeetingEye 400 Quick Start Manual preview
MeetingEye 400
Бренд: Yealink Страницы: 16
Yealink One Talk CP960 Quick Manual preview
One Talk CP960
Бренд: Yealink Страницы: 4
Yealink One Talk CP960 Quick Start Manual preview
One Talk CP960
Бренд: Yealink Страницы: 20
Yealink VC400 Administrator'S Manual preview
VC400
Бренд: Yealink Страницы: 299
Yealink VC210 Teams Edition Quick Start Manual preview
VC210 Teams Edition
Бренд: Yealink Страницы: 12
Yealink CP860 SERIES Quick User Manual preview
CP860 SERIES
Бренд: Yealink Страницы: 5
Yealink VC400 Quick Start Manual preview
VC400
Бренд: Yealink Страницы: 16
Yealink MeetingBar A20 User Manual preview
MeetingBar A20
Бренд: Yealink Страницы: 30
Yealink MeetingSpace VC200 Quick Start Manual preview
MeetingSpace VC200
Бренд: Yealink Страницы: 8
Yealink MVC Series: MVC800 Quick Start Manual preview
MVC Series: MVC800
Бренд: Yealink Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды