Cisco 500 Series, Руководство по настройке

Страница: 723 / 1140

33-5
Cisco Security Appliance Command Line Configuration Guide
OL-12172-03
Chapter 33 Configuring Network Admission Control
Configuring a NAC Policy
Configuring a NAC Policy
After you use the nac-policy command to name a NAC Framework policy, use the following sections to
assign values to its attributes before you assign it to a group policy.
Specifying the Access Control Server Group
You must configure at least one Cisco Access Control Server to support NAC. Use the aaa-server host
command to name the Access Control Server group even if the group contains only one server.
You can enter the following command to display the AAA server configuration:
show running-config aaa-server
For example:
hostname(config)# show running-config aaa-server
aaa-server acs-group1 protocol radius
aaa-server acs-group1 (outside) host 192.168.22.44
key secret
radius-common-pw secret
hostname(config)#
Enter the following command in nac-policy-nac-framework configuration mode to specify the group to
be used for NAC posture validation:
[
no
] authentication-server-group server-group
Use the no form of the command if you want to remove the command from the NAC policy.
server-group must match the server-tag variable specified in the aaa-server host command. It is optional
if you are using the no version of the command.
For example, enter the following command to specify acs-group1 as the authentication server group to
be used for NAC posture validation:
hostname(config-nac-policy-nac-framework)# authentication-server-group acs-group1
hostname(config-nac-policy-nac-framework)
Setting the Query-for-Posture-Changes Timer
After each successful posture validation, the security appliance starts a status query timer. The expiration
of this timer triggers a query to the remote host for changes in posture since the last posture validation.
A response indicating no change resets the status query timer. A response indicating a change in posture
triggers an unconditional posture revalidation. The security appliance maintains the current access
policy during revalidation.
By default, the interval between each successful posture validation and the status query, and each
subsequent status query, is 300 seconds (5 minutes). Enter the following command in
nac-policy-nac-framework configuration mode to change the status query interval:
[
no
] sq-period seconds