Introduction and Setup Page 2
Demo Board Components
System Requirements
Ensure that your computer system has the following requirements:
Screw Transition Board
P/N: ETB-ST or ETB-HV
Provides a transition point
for back wiring to the
tester.
Vise Test Block
P/N: EVLC-05
Provides an easy way to
clamp a circular mating
connector up to 2 inches in
diameter.
E-Z-Hook
Block
P/N: EZH2-05
Test block with 2 pre-
mounted E-Z-Hook test clips,
which can be used for
stripped wires or ring lugs.
Monitor Resolution
1024 X 768 or better.
Video Card
64 MB on board RAM
Windows Environment
Windows 7, XP Pro, XP Home.
USB
Port
1 USB Port 2.0 compatible
Note:
For digital I/O (not used
in this demo) a serial port or
USB Port with adapter is
required.
Mouse
Required for installation and
test setup. Can be replaced
with a barcode reader on the
production floor.
Computer CPU
1.6 GHz Processor Speed
or better
CD ROM Drive
Required for install
Free Disk Space
Minimum: 5 GB
Recommended: 10 GB
Note
: For the demo you
only need 90 MB free.
Speaker & Sound Card
Required!!
RAM Memory
Recommended: 1 GB.
Tall Bracket with
Long Mount
P/N: EWTL-05
Mounts vise test
blocks.
Vise Test Block
P/N: EVM2-05
Provides an easy way to
clamp a rectangular shaped
connector up to 2-inches.
Grid Tile
P/N: EWGT-10
Screw mounted grid tiles
allow harness components
to be easily moved.
Drop Nail Bracket
P/N: EDNB-0B
Nails can be dropped for
storage, application of
sheathing, lacing, etc.
