Introduction and Setup Page 13
Checking the Sound
The easy-wire software relies on sound prompts to provide test feedback to the operator.
Step 1
In the easy-wire main menu,
click the green status indicator.
You should hear two trumpet
sounds coming from your
speakers.
Step 2
If you hear the sounds,
skip to
“Demo Part 1: Test and Test Errors”
on the next page.
If you
do not
hear the sounds,
see
the
“Troubleshooting” section below.
Troubleshooting
To get the sound working, do the following:
Verify that speakers are connected to the PC and have power.
Verify that the speakers are on and that the volume is turned up.
Verify that the volume on the PC is turned up (the PC volume control can be found on your
Windows task bar).
If the sound problem persists,
call Cirris at 1-800-441-9910.
