Circutor Computer SMART III FAST 12, Инструкция по эксплуатации

Страница: 90 / 112

5�18�- RS-485 COMMUNICATIONS
In this point the RS-485 communication parameters can be configured.
Press the
key to enter editing mode. It is identified by the symbol and the blinking of the
digits to be modified.
The parameters to be configured are:
The
peripheral number
assigned, from 1 to 254.
The transmission speed , BaudRate: 9600 or 19200.
The
parity
:

none
: no parity.

Even
: even parity.

Odd
: odd parity
The number of stop bits : 1 or 2
The key increases the digit value or shows the next option.
The key decreases the digit value or shows the next option.
The key skips to the previous digit or the previous parameter.
The key skips to the next digit or the next parameter.
Press to validate the data; the symbol disappears from the display.
If the value entered is lower than the minimum value or higher than the maximum value, the backlight
of the display flashes and the value entered is replaced with the minimum or maximum value, or with
the last value validated.
Press the key to access the next programming step.
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
“5.30.- SIMULATION
SCREEN”
.
90
Computer SMART III FAST
Instruction Manual